PD 642 Analogue Input Module
The PD 642 is an analogue input module
with four voltage input (0-100 mV) channels.
The four input channels can be
configured individually for either 0-100 mV or thermocouple temperature
sensor input.
The PD 642 provides linearization for
the following types of thermocouple transducers: Type R, S, B, J, T, E, K
and N.
|
|
|
PD 642 Block Schematic
Channel Structure
The PD 642 consists of 5 channels as
shown in the table.
Power supply
|
Power supply DC:
|
Nom
|
24.0 V
|
min.
|
18.0 V
|
max.
|
32.0 V
|
Ripple voltage:
|
max.
|
5 %
|
|
|
|
Power consumption @ 24V DC
|
|
|
Operation:
|
max.
|
25 mA
|
Current at power up:
|
max.
|
60 mA
|
|
Analogue input (Ch. 1- 4)
|
Signal type:
|
Voltage (0-100 mV)
|
Input impedance:
|
> 5 MΩ
|
Calibration error:
|
@ Tamb. 20 °C
|
max. +/- 0.1 % of fullscale
|
Ambient temperature coefficient Tc:
|
max.
|
+/- 100 ppm / °C
|
Ambient temperature influence (ΔV):
|
Tc x (Tambient – 20) x input
|
Resolution:
|
typ.
|
20 µV
|
Update time:
|
fixed
|
0.8 s
|
|
Voltage to temperature conversion
for thermo couples
|
Supported IEC 584-1 thermo couple
types:
|
R, S, B, J, T, E, K, N
|
(See
data sheet for thermocouple measurements)
|
|
Filter for analogue input signal
|
Type:
|
4th order low pass
|
|
Time constant:
|
configurable
|
3.0 s – 50.0 s
|
Gain error:
|
max.
|
+/- 0.1 %
|
|
Ambient temperature range
|
Operating temperature:
|
-25 °C – 70 °C
|
|
Storage temperature:
|
-40 °C – 85 °C
|
|
|
Humidity
|
Relative humidity:
|
max.
|
95 %
|
|
EMC
|
Immunity:
|
EN 61000-6-2
|
Emission:
|
EN 61000-6-3
|
|
Vibration
|
Test method:
|
IEC 60068-2-6
|
Frequency / amplitude:
|
2-10 Hz: +/- 5.0 mm
|
10-100 Hz: +/- 2g
|
Sweep rate:
|
max. 1 octave/min
|
Number of axes:
|
3 mutually
perpendicular
|
|
|
|
|
|
|
|
|
|
Related topics
Ordering Information
Wiring diagrams
LED function
Base Module
overview
Application notes
PD 640 Analogue I/O Module (Current)
PD 641 Analogue Input Module
(Temperature)
|