550 764 01 |
||
|
||
P-NET Ring Topology:
P-NET ring topology is the traditional way of installing P-NET. The P-NET cable is connected to a number of devices in a way that forms a physical ring. Each device on the ring is connected using the same principle. Devices on the P-NET ring can be connected or disconnected during operation without any disturbance of communication between the remaining devices.
A bus segment can have a maximum length of 1200 metres and can contain up to 125 devices.
BM 010 base modules used in ring topology must always be configured for loop through.
Wiring topics:
Related topics:
|